Creality Laser Module Installation Guide - Turns a 3D Printer into a Laser Engraver within Minutes

foreign [Music] pull out the original x-axis motor cable and x-axis limit switch cable [Music] pull out the original y-axis motor cable and y-axis limit switch cable foreign cable and y-axis limit switch cable of the control box to the printer [Music] connect the x-axis motor cable and x-axis limit switch cable of the control box to the printer [Music] install the laser module fixing plate it should be vertical and lock the screw install the laser module and use two thumb screws to lock it foreign penetrable flat object under the processing material [Music] the laser module with cable Z [Music] the way to adjust the focal length of 5w and 10w Laser modules are different [Music] multiple ties and cable management belt to arrange the cables connect the power adapter foreign use the data cable to connect the control box and the computer [Music] power on [Music] open light burn after installation foreign [Music] and set the maximum engraving size and click next set the origin to front left and click next click finish finally select the machine and click ok to configure successfully click edit settings choose mm slash Min and click ok [Music] foreign [Music] you can see ready if the connection is successful per dollar in console and press enter for different printers if the X and Y print size is not 220 millimeters you need to modify two configuration parameters of one hundred and thirty dollars and one hundred and thirty one dollars in the console you can find the guide in TF card click file Imports to import the picture set the position and size [Music] adjust image to set the effect and click ok [Music] set the appropriate power percent speed and pass count please refer to the TF cart for recommended parameters foreign [Music] start from According to personal habits.if you choose absolute chords please click home first press shift and click frame to preview the frame [Music] click Start to start Engraving [Music] thank you [Music] usually import.dxf or dot SVG for cutting set related parameters foreign [Music] [Music] [Music] in the cut slash layers window [Music] you must start from absolute chords during offline operation click file save G-Code to save the engraving file to the directory of the TF card [Music] the TF card into the card slot of the control box power on [Music] press the micro switch for the first time the laser module will emit weak light and repeat movement around the largest X Y edge of the process picture press the micro switch again and it will start Engraving [Music] switching to fdm printing the extension cables of the x-axis motor y-axis motor x-axis limit switch and y-axis limit switch can be left on the machine for easy plugging and unplugging [Music]

Channel: Creality

Views: 47,946

Keywords: CR Laser Falcon, laser engraver, laser cutter, creality laser, Laser, creality 3d, laser engraving, laser engraving machine, Engraving Machine, creality laser module

Id: UEBU5IQSqak

Length: 7min 2sec (422 seconds)

Published: Wed Dec 14 2022