Countertop Resurfacing Kits with Metallic Epoxy in Silver, Pearl White and Black

[Music] hey guys you probably recognize this kitchen we posted this video recently and they've remodeled new backsplash new look so we're changing the countertops up a bit I'm you can see we already rolled out the primer you've probably seen this rollout primer a hundred times we didn't show that but we're gonna we're gonna show you the rest of the process we're going to do a new cool look we're in the past we only did this on a sample board and made a video so now we're gonna do it on an entire kitchen so enjoy I saw RDD shed of the roller like we saw you guys let's wrap some tape on it this is gonna get all the loose hairs off right now I'm just applying a little bit of pressure and using this as a squeegee [Music] nice know what something out rolling over the head just yet just spread it out across the top [Music] I don't like to get right up to the edge without going over kind of leave with a little feed there [Music] now I'll just run it right to the eggs do section at a time and then then roll the face of it roll the top a little roll the face and you can see our catch basin here so we don't get drips on there the lower countertop will start dripping once I get these edges I know is that easy I know we could die you said you've all [Music] [Music] I so you see we got the top done with the base color we swirled it that helps pop the bubbles and I'm going to have two highlights and with this technique we're just gonna drizzle it all random ways with the white and we'll come back with that with the black you want to try to get on your edges too it's a really easy technique to do look awesome in your dock like I said just make sure you get up to your edges so you're headed don't look bare when you're done pays me water [Music] I don't other reasons by far really guys can see how I'm basically out of material definitely don't want to cut it that close so just get a lot on your counters everywhere and then you can always go back and add some do the same thing in between all the white ones try to go right over the white lines remember you're going random way you go across it'll really matter just don't look for line right over the white [Music] I know is that easy I know it you said you've all [Music] you don't want to run out try to feel like I did on both these highlight colors make sure you get color on all your counters before you get low all right I'm gonna take my paintbrush I kind of dipped it in the stuff on the floor got a saturate in the middle now I'm just gonna blend these colors random ways and it just like crisscross patterns and once these roller brush lights go away it's gonna look awesome just real light you're not trying to move a lot of the material around hit your edges as you go just still probably have to message your head is a little bit after after you're done doing the top we're not living in a lot I'm just hitting it real quick-like try to use a decent sized brush when you're doing this don't you in a really small brush hi guys this is after we're done at the top the edges and see how get those edges look we didn't even really have to hit them did you pour that material right to the edge to highlight colors right to the edge and they just kept flowing over Joe Austin it turned out Gregg's just escaping this the drips now periodically every 20 minutes I'm just going to scrape the drips and we'll come back tomorrow do that do the top coat welcome back guys it's the next day you see how awesome these counters turned out the cool thing about our top coats is they don't really drip so we're taking all the plastic off and just write a new Fresh Beat of tape across the tiles there's just some stuff we didn't want to get a top coat on they remember we coated these counters well two years ago and he remodeled the kitchen did cabinets got new appliances put up some crown molding did a bunch of work in there and he called this up wanted to redo these so he went from a white counter now he's got gray and they just look awesome so I'm just gonna dip and roll this top coat like like they do every time get it nice and saturated remember this stuff goes a long way I like to roll down the middle crossbow let's spread it out and just try to do short manageable sections because this stuff starts setting up once you start rolling it out you got plenty of working time minutes in the bucket or the roller tray once you start rolling it out start setting up nice leaving so the whole section we're gonna have the metal piece angling towards the direction you're gonna go you're just gonna lightly roll this back back roll slightly roll it out overlapping this is gonna help minimize any roller lines [Music] a little bit more here just look as you guys are going you can tell where my me and we send out more than you guys need so you're probably going to not be using all of this don't don't think you got to use it all know you want this on a spin and you can get it [Music] [Music] [Music] one of the easiest top coats to a black on the market given the fact that you can dip and roll it and get a lot of working time with it we'll just do the same thing it's like the finish it out overlap it a little [Music] [Music] really light you have to do it small sections I'm not trying to do this whole top or this whole bottom layer do a manageable section that's gonna keep them all alive [Music] so now that we're dead I'm gonna pull this blue tape on and the job site is pretty much cleaned out having a clean case like this just makes it so much easier to pull off you don't got a pop star to it just try not to touch the top of the counter white polish off it's about a guy just real simple process you said you've all [Music] you can see how all the press marks went away after the epoxy self level and cured it's what we call it our living resin it's moving and flowing and blending for the next eight hours while it's curing until it gets us to its hardness and where it doesn't doesn't move anymore it's a really amazing product that's why they always look different ten hours later all your roller marks your brush marks go away and then you have a an awesome blended marbleized countertop this is truly one-of-a-kind thanks for watching the video guys don't forget to subscribe comment the love it us notes you guys none of these colors in this countertop how we went over his existing epoxy counter that we did two years ago just want to show you how simple our process is to change it up if you want to do a remodel you can just go right over your existing Lazzari countertop kit thanks again guys and we'll see you next time remember the guy comm had you covered [Music]

Channel: Leggari Products

Views: 3,259,076

Rating: 4.7735672 out of 5

Keywords: epoxy countertops, metallic epoxy, countertop epoxy, stonecoat countertops, diy epoxy, diy countertops, epoxy plus, resin, concrete coatings, floor coatings, how to, how to epoxy, epoxy coatings, epoxy training

Id: P20_QhC3VgU

Length: 18min 19sec (1099 seconds)

Published: Tue Feb 20 2018

Reddit Comments

[u/LoopyMind]

Costs a fair amount of money, still looks cheap