It's G4900. The lights are going back and forth. It says code 5B00 (Error caused by full ink in waste ink container)
I need to reset this. pad reset Connect to the computer with a USB cable and go to the PC. When I checked the nozzle, it says 5B00.
You need to reset the pad. I'll run the V5610 pad reset program. I went into the pad reset program and it wasn't activated. After entering service mode on the printer, it must be executed to connect. I'll show you how to enter service mode. Please come to the device and turn it off.
(Please wait until the power goes out.) Hold down the stop button and press the power button. When it turns on, press the stop button 5 times. Please take your hands off. Please wait until the power light stops blinking. When the flashing light stops and the screen turns black, it enters service mode. I'll go to the PC. When I run the service tool program, it pops up like this.
(The vaccine program/firewall must all be turned off.) I'll press Set on the Ink Absorber Counter. The pad has been reset. I'll turn it off. I'll turn it off and on again.
What's going to happen here. I'll check if the error light comes on or if it comes back to normal screen. Yes, the machine is back to normal. Done. Let me check the nozzle. If you look at the printer, you can see how well it prints. Black, blue, red, yellow. It comes out like this.
This is how you can solve it and write it.
