Building a (6-speed manual) 2009 Audi R8! NEW WHEELS and Carbon Fiber Aero Package looks AGGRESSIVE!

[Music] welcome back to the vlog it's a very exciting day for me especially because we get to hook up the rdre it's a long time coming i've been ordering parts for this thing for the last couple of months for about six months now and finally everything arrived let me show you what we have we have the very nice looking wheels the rfx10s from rohana they're 20 inch wheels of course wrapped around with some falcon tires which you guys know and us we get along very very well and they have the best tires in the market in my opinion so we got those thing in here which is the same tires that i had on my kia and they perform outstanding moving along we have a stud and not kid because of we all know european cars stop nobody calls me [Laughter] anyways we're gonna be throwing these things on so they can make everything so much easier putting the wheels in and out down here we have a bunch of apr stuff a boys see a big wing that's a big win so for this car they make two types of wig they make the 71 inch and they make a 74 inch 74 winch is full when you have the little wide body in the back obviously i'm not going that route so i got a 71 inch surfboard so this thing the best thing about this wing inside is a chassis mount wing and everything that you need comes with the items you have the plates amount the bolts everything that you need it comes with it to include instructions we have these side skirts from apr as well we also have the trunk and as you notice with the tank it already comes pre-cut so this trunk can only be run with their wing basically is that right yeah so you have an option to buy the trunk without the pre-cut section if you just want to replace the trunk blade with the carbon fiber one or um unless you want to cut your own trunk which is fine but i'd rather not cut my original trunk uh so we ended up buying these for a couple of hundred dollars uh and everything comes pre-cut for the wing we have carbon fiber canards for the front bumper and i just purchased this somewhere online i don't remember where but i got them a long time ago we have the front lid from apr as well and this thing looks gnarly the one thing you showed me underneath can you flip oh yeah it comes with steel plates on the bottom of the lip that way you don't destroy your lips pretty smart it's like riveted in just a piece of steel or aluminum i don't know tell and they're kind of placed and you won't you can't notice that at all when it's on the ground obviously because it's so low but yeah maybe maybe we can give this to victor and and maybe uh maybe you'll save a lift let's just say this you get what you pay for all right so now you're seeing all the parts that i'm going to be throwing in this car let's get to work [Music] vicki where'd you get that merch dude check this out some new merch you can go to the description below go to twitter.com and pick it up let's go let's see that back what's that baby feel like a race team i'm gonna let you do that though for the center see that's why the lord equipped this man with his big ass thumbs the lord yeah so he could get clips like that i i just these little thumbs don't do it [Music] so right now i'm taking off um not removing the side squares but i'm unbolting the bottom of the side skirt i also got to take the wheel wells out of the uh the corners so i'm able to uh push down on the side skirt itself that way when the aps side screw goes in here i'm able to bolt it down from the inside of the instruction set so that's what i'm doing so i want to interrupt this video to remind you of our contest going on right now it is straddle dream build one and what it is is us grabbing your personal car and turning it into something really cool and fancy if you guys want to have your personal project built by us here at trotto just go to the link description below and check out all the information there is only a couple of days left since the contest ends on august 31st which is just a couple of days from now so please don't wait go to the link description below follow the instructions and let us build your car [Music] thumbstars save the day those rocket extensions look way wider than what i thought they were going to be [Music] dude but i love it man i seen uh i just i've seen a lot of exotics here get built especially on tv's eye when they do carbon fiber lips or side skirts they literally just show this much and for you to actually see this whole thing it's amazing it's pretty cool damn those are sick though is that it's like a it's preset you can't put it in no it's pretty set yet maybe this is gonna be aggressive yeah i'm gonna grab a marker i'm gonna get down there i'm gonna mark some stuff that needs to be marked drill some 3 8 of an inch holes i believe it is and we'll bolt everything down [Music] [Applause] [Music] [Music] [Applause] [Music] do all right so besides that look at that she ain't going nowhere [Music] [Applause] [Music] [Applause] [Music] [Applause] [Music] no faith no faith one day one day he's gonna come back tomorrow he's gonna be messed up screen it's going to be right here you're going to see it all right little carbon flakes no no faith whatsoever [Music] what are we doing here quinn putting wheel studs in instead of the lug bolts [Music] [Applause] [Music] [Applause] that's it we are going to take this thing apart and this thing apart because we are putting a carbon fiber trunk lid and we are going to start mounting the wing which requires wing mounts which requires cutting and smoking some holes and these are you gonna go surfing you got a surfboard shot inside of the car but i'm gonna take lots of pictures taking surfing lessons looks like it where's this wing the wing it's pretty nice it's a cool shape so right now we're making lines we're going to draw some lines so we're literally following the instructions that api provides and we're doing five and a quarter from the left side of the panel to the right and we're doing a half inches from the bottom side up and we need to cut that off because that is where our chassis mount plates is going to be sitting see and that's the basically that's what we're doing [Music] [Music] do it did you do it creep dude what a creep [Music] i just got done making more holes next i'm going to rip knot the chassis one down three more to go [Music] great success so this piece is like independent oh yeah this has a bunch of bolts that's cool so they put like a exoskeleton of the hatch and this plate just like bolts to it because ricky bought a replacement piece that's carbon fiber and is already trimmed out for the wing i'm just glad we don't have to mess with any of this stuff just unbolt it from there and we're done sick [Music] [Music] so i don't know exactly where these are going to fall because this section right here is cut out for the wing mounts to stick up so like i don't know if we need to move it back or forward or left or right or how this is all going to work out so it's super easy to just pop that panel back on when we're done so i think we're just going to leave it loose and when ricky finishes putting his wing mounts on then we'll kind of check where we're going to sit as far as fitment goes when we bring it down and we can make our adjustments and lock it down so right now i have the uh chassis mount plate installed and then this is one of the wing mounts that goes on the side of it and it gets bolted out from the bottom so that's already done and i'm just mocking everything right now and then afterwards i'm just going to take everything out and put some loctite in it just to make sure this will come out but so far so good everything is going fine pretty much just test fitting everything [Music] i lift the bolts can you hold this so this is the only wing that i've noticed that's in the market for r8 that lets you use your factory wing full function most of you have to disconnect this because usually wings go on top of this wing this is the only mod that allows you to keep both systems at the same time ricky up and left you got other things to do then hold this let me go get these bolts hold this here i am let me see if i can get the pulse thank you sir let's just just get a couple starting here so when you close this it's supposed to miss this yeah bring it down oh yeah look at that perfect [Music] we just finished mounting the wing mounts we're going to test the power on it and it clears now that we're going to clear this we're going to tighten everything back up [Music] you go like that to keep it level and as you adjust the wing you can adjust this to stay level because right now obviously it's not level but if you do this and that crazy apr thought of everything cool first things first [Music] i like it a lot [Music] it's time for the wheels it is time let's see if evan speck got the right specs different car baby that is so sick [Music] bro yeah i think even got it right on it sick really nice from rohana this is the first set of rohanas we put on i'm very impressed with the quality so far the finish is really good fitment looks really good obviously we need to get it on the ground but it's really aggressive gloss black the gloss black is the way to go for this this particular car what a transformation one video transformation one day a few hours it was uh apr made it very very easy to put this on the instructions were super easy to follow and everything fit perfect there was no trimming needed for this thing to go in [Music] let's go [Music] uh [Music] [Applause] [Music] so [Applause] [Music] [Music] good dang i think that's so sick it's a totally different car now can arch i love the canon front lift is wow dude [Music] that looks sick i almost want you to lower it just a little bit but i know i know you don't want to touch the suspension because the car is so good yeah i do not want to touch the suspension it totally looks like a dtm like lemon car dude that thing looks so sick all right so as you can see you guys see the front lit taskers and the big wing from apr everything fit perfectly we have the karnas which i sourced on the internet the front headlights and the whole front end it has ppf from tin world of course the rohana rfx wheels rfx10 wheels with the falcon tires you can pretty much find everything you see here on our website if you go to throttle.com if you haven't already you can literally outsource everything to our website top of that um the calipers which i don't think i mentioned but i painted him on my uh in my house before i even got here so that was done uh and don't forget guys like this is something that if you would have told me a year ago i would have had an r8 i would have said you're crazy i just went out and got one and i'm lucky i'm blessed enough that now i'm able to afford it and just to have the arnold sarah she's into the car is pretty much insane i still can't believe it so chase your dreams what i'm trying to say don't stop and like tj said keep moving forward or just gotta want it so that's it guys for this video i'll see you guys in the next one thank you so much and let me know what i should do next to my all right see ya [Music] uh [Music] you

Channel: throtl

Views: 617,517

Keywords: throtl, throttl, throtl.com, audi r8, new car, new exotic, buying new exotic, audi, r8 v8, v8 r8, gated 6, gated 6 speed manual, tj hunt, r8 reveal, reveal, new car reveal, revealing, new supercar, exotic car, purchase, r8 build, apr performance, apr carbon fiber, apr r8, apr audi r8, rohana, rohana wheels, rohana rfx10, rohana audi, rohana r8, vip dream build, vip dream build 1

Id: 0_S5o7n_NCw

Length: 19min 17sec (1157 seconds)

Published: Sun Aug 29 2021