Baling Hay ‘23 in East Tennessee

well you all know what this means this makes my second year having this rake I really like it I bought it off an older lady in a town called Bean Station that's next to us now where this Haze so thin I told Dad to leave a gap and to make kind of three into one when your square baler doesn't really have a lot to eat your Bales come out misshapen so you're always better off making a bigger window and going slower [Music] foreign me and my dad we try to farm a little in Upper East Tennessee next to Virginia Kentucky it's kind of where we're located at we're hobby Farmers we don't do any of this for a living we just do it just to keep our ground clean and to have some fun with some of the old tractors and stuff that we have so I hope you guys have been enjoying the videos I see a lot of positive comments and some positive feedback and I really appreciate you guys for that now last night we raked just a little bit just to make sure that my Baler is going to work I've done got it greased up every alamide on it or every grease zerk and now we're going to go ahead we're going to go ahead and grease our chains we'll grease our big drive chain the cam chain feeder chain and pickup chain so we'll go ahead and we'll see if we can get her fired up and going now one thing that I really like about this old David Brown that I Bell hay with it's got a two-stage clutch on it which makes it super nice for engaging PTO what I mean by that is you can just wear it out of the clutch and it just barely turns it when you get something that's independent PTO it just shoves it you know turns it straight on there's no easing into it so we'll go ahead and roll up our trains and we'll see if we can get started in here this deep full and everything let me move man I thought I'd show you basically how the Baler works so of course you know you have your pickup up front which picks up the heat up has the a in here these Forks move the a over to the chamber and you can see that knife did not get at least [Music] and there's stuff that I'm spraying on is crap up it's a really good chain lubricant we've got one right here I'm gonna hit yes I know it makes them messy but that's what you got to do to keep them in good shape have this one oh [Music] all right then we have this one all right now we should be ready to go ahead and set everything out and I'll see if I can get us some footage of us going here in a little bit foreign thank you now one thing about Square baling is if you want a bell that's perfectly Square on each side the feeder housing has to be fed evenly like that's a good example of how they should be fed [Music] now if you want those good even square bales that feeder house walking [Music] but now once you see it start catching up like that that's when it's time to drop a gear just like that whatever you do you just got to keep it full all right that's about your max right there you don't want to push it any harder than that but I'm gonna stop and show you all something now these windrows get thicker here and that's what I was talking about earlier so I'm gonna drop it down to First all right [Music] [Music] [Music] [Applause] foreign [Music] I got some buddies over there I've got a good buddy Matt where you at Matt hey look at him say hi to YouTube Matt and so we do good on our Stacks until we get to the back then we get a little tarred yeah let's just head on the barn it was kind of a little bit thin uh normally first cut and I get about 500 out of this field we got about 360 out of it this time so it just is what it is now I know some of y'all are still going to comment and be like where's your grapple we've been having issues out of the grapple the power beyond block was hooked up backwards and we think we finally got it hooked up right and now the pins that actually hold the the grapple in don't exactly line up swipe torch them out but hopefully we will have some footage of the grapple in the 4000. that moment when all the other trucks are hooked up so you just use the word rig probably the dumbest juice ever I'll have for this truck but hey it's truck have a good one folks

Channel: Lamb Farms

Views: 197,776

Keywords:

Id: asgDdemfQmE

Length: 11min 57sec (717 seconds)

Published: Wed May 31 2023