hello friends welcome to a new tutorial
I want to show you in this video how are we going to set up a
presentation of a project as in this case we have a house
two-family single-family when we have finished it ourselves
we want to, for example, print in size of paper we need and
also on an appropriate scale that we want, then I will show
how are we going to do a final presentation
then as we already know in this part of AutoCAD that would be the model is where
we design our jobs we do our projects and different
not things and we also have other tabs that
they are Layout Layout in Spanish means presentation therefore
here we will have a first presentation of a second presentation here
has placed a third presentation which is A3 size paper where I have
configured the project for a scale 1/100
so let's do this same presentation but now for a size
of paper A2 logically the scales are not going to be
the same because having a size paper we're going to need
a larger scale well then that's what we're going to go for
to layout that as I explained is where we are going to do the
presentation in layout 1 or layout 2 that would be the same
well the first thing to do is set the paper size
so that always seems to us in the layout a standard size can be
say, a random size then to simply configure it
we go here in layout for example layout 1 we right click and we
our options will appear and we will go to this option that says
page setup manager we click will appear here all presentations that
in this case we have three layout 1, layout 2 and the
presentation to three that I already showed so
we selected layout one that is where we are going to configure now we give
click on modify where we are going to make the modifications well the first thing to do is select the plotter if we
we had a plotter installed we selected it from here but yes
we want to set up our project and exit to print out
then we'll set it up selecting this option of Dwg pdf pc3
if we click here we will see this option
we put the first one has nothing to do and for this part we are going to select
the size of the paper as we already know we are going to configure in this case the
size A2 right? we always have two options the first we will
select it so you can see we will always get the role of
horizontal and the second we will also select it so that they can see us
it will come vertically, yes? in this case we will leave it in the
first choice horizontally now another thing we should look at
what to plot we have to be in layout well the next thing is that in the scale the units place them in millimeters this is important to avoid problems well another thing we can do here for example if
we want our plan leave in black and white
we select monochrome if in this case we select monochrome in this case we will leave it just as well, now we give it ok we close here and as you will see
set up our A2 paper size now let's do the presentation for that we have to add these windows which are the views here we have a sight for example us
we can use this and configure them as we want but I'm going to erase it so that you see how they are added to the
select or delete it and delete it now to add a new one
view there are actually two ways the first is simply typing viewport and here we will see this command and here we can add
new views as you will see here we have several types we are just going to choose simple we give it ok and
now let's to draw well let's disable this command
Let's draw as if we were making a rectangle yes it is
important to know that everything that is within these dotted lines will be
what is going to be printed and everything be outside these dotted lines
it will not print so be careful with that
good for simply scaling we will double click inside the view which is as if we were entering the model we are actually entering the model because if we modify something from here it will also
be modified in the model good for scale
simply what we should do is to type the command Zoom we give enter
now how can they realize here we found several options
within them is the scale option right? we can click directly or
type "S" and press enter which would also be the same
now we are asked to enter a scale factor Let's type first thousand
because we remember that we had configured the units in millimeters we put a bar "/" and now the scale that we are going to
configure the plan for example if we want 1/50 we put 50, it's
important that after we put the scale has to always go XP this is important we give you enter and
we already have the scale 1/50 so as which as you may notice for this paper size this scale is very large then not
Let's reduce it to a little we can use the scale 1/75 which is a bit
smaller zoom S of scale
enter type 1000/75 xp right? and as you will see this scale is already more
acceptable for the paper size we have so now let's focus simply move the plane as you can see there
we could already print the plans but as I mentioned earlier Let's make a format of this type then we will do it later
let's go to distribution 1 again good to get out of sight once we focus our project we double-click out of view
and we're already out now how are we going to configure our project? to eliminate this separation between the planes there are two ways in which the former would be we go to the model that we select one of these planes for example the first level and we approach the second level and thus we would be cutting the distance between the two planes or simply
here we can do it easily so let's take a look and we'll make it smaller only we have a map of this
let's go into the view double-click move and center
the foreground gives you escape and double-click outside and now we are going to copy this view, because the commands they work as is in the model
then select copy and copy here on the side
where are we going to put the first level now in this new view we will enter with double click we move and look the first level
we focus so that those who correctly climb to the second floor I think it's fine now double-click
get out of sight well ... now let's put a letterhead on it
our plane I already have a letterhead
prepared that the one that used in my works
so I'm going to put the letterhead here well then I put it here well here simply copy using
control + C ... control V sometimes we copy a letterhead
but it does not fit into the paper we have then you simply have to scale it by
example, assume that by copying this letterhead we have become bigger
than expected for example of this size we simply select it with the
we reduced it to the size we need
so I'm going to give it back since it was already then the format now has a location map then we are going to add that plane
also where it will be located the earth
so let's insert rectangle around here in this way that is up to the height well we already have here where we are going to
put the location of our where this is going to take place.
building now here as you may realize we have a circular view and how we are going to insert a circular once
well let's do it as follows how can I repeat them again
there are several ways to add a new view well, the other way would be
Click here in the design on top
we look for this option in this case object is already selected, but for
the defect always appears rectangular that if we make a new vision
rectangular is the same as we did before Let's eliminate this
because what we want is a circular view what we do is; draw a circle let's move around here to stay focused all good
so now we are going to convert this circle in view no, let's go here layout now we are going to deploy the options and we have the third is object with this option we will be able to convert
any object in a new view then we click and it asks us to select the object we select the circle and now it's a new view
we double click inside here is the plan
location where the house is located well we can simply this view leave it without any scale because it is not so important in this case but let's give it a try
ZOOM scale, scale we already know that we have to double-click on the view, right? enter the scale for example 1000, as this is a very large plane let's give it a smaller scale
1000/5000 xp and well I think would be well 1/5 000 then
double click out and we already have our location plan
now that we have more here we have the magnetic north that simply
control s The important thing about this is how they can
to realize that here in layout we have many more options to make a presentation which in the model would suddenly be a bit more
complicated, right? now copy these texts here control "c" control "v" and we can create our own formats for example I already have created this format, and I can use it in some other project, then I put Paste here as the size A3 is smaller logically these texts will be more
small also not then I select everything and give it a larger scale simply scales
command and here I am going to give a greater scale there would be fine now let's move this again command to move, we activate ortho (F8) and I think it would be fine this too we are going to move it to here, here we will select where is located the ground if and as good as
you will see we have already configured our plane for a presentation now
Let's see how it's going to stay at the moment we are going to print
we select here the image of the printer or we can put control + p
to have the options appear now we put here in preview in
this case as we had left the color format shows us color
Now we do not want these lines to appear, right? then we will make them disappear we put cancel we are in layout again, to
disappear these two pictures we are going to select them, we are going to go home and we are going to select the layer which is the one that is never going to print that Defpoints
we give the layer style to these two pictures we are going to close everything
our project to make it look better well we have our project
configured now let's see again as preview is previewed before
printed as you can see by putting that layer style to the frames of the
views will no longer appear in print and our project already
is ready to be printed if we want it in black and white simply
we selected it here monochrome let's go to the preview here and you're in
black and white good to save our project
we will simply give you this option apply for layout
in this way we can take our project and print it on
another place we are going to give it here and if we give it ok this
will convert into a pdf document For example we are going to save it here and this will become a pdf document that we too can take
print right? well good friends
the purpose of this video was to show them how to set up their plan in a final presentation giving it a certain scale, already saw how that is done further selecting a suitable role Good friends, so you know if this video has been useful to you
do not forget to give I like to share it with your friends and I invite you to subscribe
to this channel for more tutorials then we'll see you next time