Another method to fold a fitted sheet

I'm going to show how to fold a fitted sheet I've watched several videos on YouTube and everybody seems to have their own method I've kind of learned something from each one and came up with my own method so here we go you take it out of the dryer or wherever it is and it doesn't matter which corner you start with you just want to find a corner there's a corner and you want to put your hand on the on the outside here's the outside that fits on the bed you want four to right hand there so that the seam the open seam is the unfinished seam is on the inside then you just go down along the edge until you find another corner and you put your left hand inside so now you have your fingers on each corner so that you're looking at the inside of the sheet put your left hand on to your right hand and fold it over so that both corners are lined up on your finger and then the seams can line up straight with each other then go to the other end of the sheet follow down the side of the lower one you've got this one's on top this one's underneath go down that lower one until you get to a corner again your hand goes on the finish side and the unfinished seam is facing out now you get the last corner and you want to take and get your finger that's on this corner into that other corner so now you have two corners on this hand and your right hand two corners on your left hand and you have an outside the sheets facing out on top and underneath where your hand is the you're on the finish side of the sheet as well then take both hands put your left hand against your right and turn the sheet inside-out onto your right hand so now you still should have an outside finished edge okay at this point you can grab the the inside here and fluff it out a little bit and tell you when we flip it around the side some more it should you shake it down so it's it looks square on the bottom it looks square on top we're hanging down the amount of the seam here you put your left hand under it so you hold it up so it's hanging down that amount on the other side the left side and you lay it down now you adjust the left side so you have the same situation as the top side and you end up with a 90-degree corner here of all the elastic portion now just take the sheet it should look square at this end and fold it over not a third of the way typically that's up to where this corner is and the elastic goes across and then fold it one more time and you end up with the sheet straight across in the rectangle now fold it the third and then you're going to fold it a third again and you should end up with a nice square fitted sheet similar to what it looks like coming out of the package although they tend to vacuum form it there's your fitted sheet

Channel: Vincent Endter

Views: 414,355

Rating: 4.6284089 out of 5

Keywords: Sheets, Laundry, Chores, Domestic work

Id: 65UzQfjMFrs

Length: 4min 32sec (272 seconds)

Published: Fri Jan 06 2017