ADVANCED Warp Shake - After Effects AMV Tutorial

all right yo so the first thing i'm gonna do is just add some skills here you can skip this part if you want if you just want to go like straight to the shake and stuff so yeah [Music] [Music] all right now the first shake you're going to want to add is just a little twitch in the beginning let's add that duplicate it and then turn off the bottom one we're going to focus on the first twitch first so we're going to want to change the speed to 70 the amount to like 30. um keyframe the amount on the first frame of your clip enable light and slide and then move like four frames forward and then turn the amount to zero and then that's our first switch [Music] now for the second twitch we're gonna change the speed to 125 and the amount to four and we're gonna enable light and slide and then we're gonna open up operator controls and then open up the light and slide panel change the light amount to like 200 the slight amount to 20 25 doesn't matter uh the rgb split to 50 the motion blur to 30 or 40 and the slide switches to nine now my next shake you're going to want to add is s-shape you're want to change the amplitude and the frequency both the two and then keyframe the amplitude at two in the beginning and then open up the tilt y shake and x and then just copy my settings here then go to the end of your clip place another keyframe and then make sort of a u-graph you're going to want to pull both lines down until they reach the zero line like right there yeah zero mark and if you don't like how the shake looks then you can just melt uh like mess with the phase and stuff i usually miss with the tilt phase or just that face heading under the frequency of that shake until i like how it looks so now you're going to want to make an adjustment layer and cut it to the size of your clip and add bcc ripple on it and then just copy the settings that i got so change the radius to 550 the height to 45. and the wave width to about 115 keyframe the wave width at the start of your clip and then turn the speed to like .6 and for the inside radius put it to about 400 and max out the falloff then go to the end of your clip and then make a keyframe to about like a thousand mmm [Music]

Channel: Certi

Views: 153,657

Keywords: anime, animeedit, after effects tutorial, animeamv, animeediting, amv, amvedit, Shake tutorial, amv tutorial, after effects shake tutorial, zcookn

Id: Cet37en58is

Length: 4min 43sec (283 seconds)

Published: Sun Feb 20 2022