#513 Macbook Pro A1278 - Gets green Magsafe but no orange / charge. Not the battery?

all right we're going to do a um quick close to midnight job with an a1278 and um i'm not exactly sure what they're saying here basically so like it seems like it's always been connected to power and then it doesn't charge and i can't work out with the means it doesn't turn on as well but it does get a green light but it's not charging the battery you know they tried different battery and it didn't change anything so now sort of not quite sure what i'm dealing with hey jessica been a while daniel travis andrew stewart anyway we'll plug it in and see what happens see where's that chipmunk okay okay it's powering up uh okay see how it's doing this and then we can that's interesting it was sort of looping there for a bit and we're drawing in here and it bond interesting is doing all that with the lid shot so it's alive but it's weird it's more curious we've got no display hmm [Music] i always forget this one screw by miles okay so we've got a samsung solid so it's a good start battery connector has been matched up a bit and this is a 2936 this is an older one this is my original hunting ground as it were first ever macbook was the 2936 for me not exactly sure what i'm looking for if anything at all if it's simply a no charge thing it could be the isl or it could be the smc is it interesting i didn't have a backlight then yeah pull the board out let's find ourselves a t6 oh yeah let me clear those lungs out t4 t6 it could have been someone accidentally shorted out the battery like when they um took it off they might have used a metal connector or something i don't know what's the voltage on the charging circuit i haven't tested i want to take the board out and just have a look at it visually especially machines this age they all deserve a bit of a visual inspection anyway get the lint out of the system dunder in 96. thank you very much for the five pound i am certainly chugging along i'm just going to try and cut through the backlog of jobs and also deal with the new ones the trouble with a lot of the backlog jobs is they're all obscure faults you know things i just can't seem to fix and um according to my queue there's a good 20 odd machines here that i can't seem to fix and at some point i have to make a decision whether i'm going to give it another shot or just call it a day send it back claimed as a no fix and hope that maybe there's another tech out there you can solve it but it seems like it won't be won't be me solving it today as it were hey cam they're still they're still popular here i don't mind people people get quoted up from for the board repair cost and if they're happy to take it then i'm happy to do it i mean it's not my favorite type of board but i'm still happy to do them hey toes tech yeah optimizer calling it quits is hard half that's the ego and half of it's just the disappoint you don't want to disappoint the customer but sometimes it's just a reality you can't dodge okay why do i feel like i'm missing a oh i know why it's because the plastic adhesion on the underside yep after a few years the heatsink sticks to the plastic the back side of the keyboard thing and of course you've got to get the microphone out too so we're such a professional process getting this microphone out byron ambo 35 canadian which is pretty much going to be about 35 australian thank you what do i have the pleasure whatever the pleasure of that for sound horse i will have some robust tea later that will fix me right up hey barry it's hard to when the customer says oh look you know give it another go see how you go i don't mind i don't mind waiting a bit longer and it just really i think you need to if you actually want to run a proper businesses repair place as opposed to a tech tech haven then i think certainly if it goes over one hour of work on the job and you still haven't still not looking like you're going to fix it then i think you just need to walk away from it but that that is definitely hard because a lot of us we do this we grow these businesses out of the fact that we have a passion for the tech and that is in many ways our greatest enemy if we didn't have the passion if we were purely pragmatic business people we'd do a lot better some people can do the two lewis does a pretty good job of doing the two and other people like myself really do struggle with it i enjoy puzzles too much and this one looks like it's going to be possibly inconclusive what's the bet it's just a bad second bad battery oh oracle databases i'll pass on that all my stuff these days is either sql lite or postgres sql so from that you can tell i'm not really a heavy duty database person i mean postgres is pretty good it's not as quick as some but i do like the fact that it's quite pedantic about how it goes about its transactions it's so it's do it properly first is their sort of attitude as opposed to say my sequel where it was like do it as quick as possible and hope it's good enough or at least that's how i that's the way it was originally there they'll probably change these days yeah this little sob is feeling inconclusive and i don't like that yeah i'll plug it in just now i was just looking for anything obvious like a great big chunk of shrek snot somewhere particularly around all this bottom edge here i was expecting to see something but being gravely disappointed it seems hey jct richard bicker there miles definitely uh baiting me into a false sense yep optimize your right it's a lot of that you know what don't miss maybe if i try it tomorrow i'll have a clearer head and i'll see what i see what was obvious but i couldn't see yesterday all that sort of stuff hey peter 1466. and now is the time where i'll bring up the board view and schematic so i can actually see where i'm supposed to be probing around here so that i can find what i'm looking for so better 29 36 up we've got a 3115 up from last night speaking of which um there was a board the other night that i did it was the 850 board i think it was and i was saying that probably just need ultrasonic after we did a little bit of the flux and boil and it turned out yeah it's working fine now but the 3115 that we were working on last night it is working but it's running slow so i think it may actually have a bit of a dodgy smc on it because it won't come up to speed it won't won't even cook up the processor at all i'm just opening up the 2936 okay two three hot you'd think i'd learn where the fuses were on there there it is straight away it's obvious as soon as i'm reminded inside dark sdk yeah it's beating and blinking but the trouble is it's not charging so it's the fault that's been complained about sitting at 640. so what have we got on our bus 1265 seeing if that's creeping up at all it's hard to say it's more just wiggling all over the place rather than creeping up i'll get another battery and see how that behaves and another 1278 battery i'm sure i've got somewhere around trouble is i don't know if this is good or not yeah yeah it appears not to be charging but it could be the battery telling it not to charge at this point a bit of mark this one is this that's interesting i took the battery out and it killed the whole system okay that's a bit of a hint means something with our probably our dual diode setup might be wrong and this whole sequence here that feels wrong too that is not how it should go see i mean cycling five or six times that's a bit ridiculous and it goes again so we've got something unstable going on here maybe bad car sense lars johannesson thank you for the dkk i don't know what i'm not sure what dkk is oh why am i so choked up tonight it's all the emotion so it punches out to one amp it shouldn't be doing that it's almost like there's something okay put that aside see how it pays the battery off and with the battery off oh yeah it does come up 850 that's a little steep well i gotta admit though i'm not i don't recall exactly what the 2936 takes on boot but yeah we're going to cheat bring out the gym cam now i know people say this is cheating you know paul you should really diagnose what's going on danish kroner thank you very much i appreciate that but realistically in my opinion and this goes towards um not being a technical tech and just simply being a money making tech then you're going to use the tools that give you the hints that you need as quickly as possible and if that means bringing out a thermal camera then so be it yeah i think a lot of people get tired of well i shouldn't say a lot of people some people get tired up on the whole elitism um uniqueness special all those sort of thing you're trying to compartmentalize themselves as being something of a special person um and i mean we all like to do that we all like to feel special but at the end of the day we're trying to make money here and we're trying to fix things so if it means bringing out the infrared camera to save 30 minutes then by all means you know it should be there's other things should we not use because we feel like it violates the principles of wholesome repair i don't know okay let's watch this thing go yeah exactly use it why yourself okay so the cpu is running i have a feeling this might be a current sense issue or something very borderline they all look like they're powering up normally i do find it a nice shot to see the heat pipe doing its job i kind of want to let cool down just so that we can watch it turn the heat pipe into the raging inferno but there's nothing specifically jumping up so it definitely makes me start to think we've got a current sense issue so we've either got the isl is faulty or the resistors there's a connection fault so we'll have a visual check around that area and see what we can find barry i did today where do you think you saw that barry i'll bring it up again on that side just for you i personally didn't see anything but i am half asleep so i'm willing to since you are a relatively reputable regular you're a triple r then i'm willing to have another look just for you so we've got this one this one cpu there's this little bit up here that could be possible that there i believe is the audio section and that is often where we get a shorted cap oh cripey sorry guys yeah okay all right so up here is this where you're talking about barry this audio sort of set of the audio is actually up here so this is something else but yeah these seem normal let's try and reduce the i don't seem to have anything else jumping out yeah this is the only one that's out of the area hey guys bottom left let's go for a full flood here bottom left of larger chip which larger chip you talk about here about this here i can definitely see but not much else near the purple edges quite a few one near the screw hole there's that there's that is that that there is not really a pulse and that's just a um i really should stop that line coloring up things yeah i'm going to look at this one up here and then i'm going to check the current sense lines for resistance hmm so these two here they would come up and down with the power which i consider to be pretty normal this one up here not sure about that audio is up here that's where i used to find heartbeat failures up here on these caps but that's not where we were seeing it today so i'm going to instead have a look at the isl x and see what our resistances are like on those current sense lines okay 21 that's right then this one here well that's pretty wild out there even if my probes are misbehaving that's way out okay let's have a look at the schematic and board view at least i'm pretty sure i'm measuring the right thing i'm just simply going by the design of the board not by the actual let's see okay so yeah we're looking at this pair here that we've got 200 odd aims and we should only have about two or three ohms so that's a problem as if the all-in works so i could be wrong but let's just double check this again scroll in that see 220 is a bit excessive so get rid of this bit of junk here it could be a bad resistor under there but more than likely it's probably just a bad current sense resistor 70 50. yeah it actually doesn't look that bad there okay so the current sense resistor is okay so we could have either a bad resistor that one's okay oh we've got bad beers ah okay this resistor hidden under here is probably faulty well i shouldn't say probably it might be faulty i can only hope it is so we can all pat ourselves on the back for a job well done and i can go and watch the last couple of episodes of futurama uh yeah look there's a burn there you go look at that telltale burn mark there from the resistor that has vented itself and you can see the damage on it yep nice so the protective goop in a way well almost let that one get away with it uh there was three or four chips all pulsating but no this was not one of the chips pulsating the chips that were looking like they were powering up they were all um peripheral type chips that's interesting they actually came off really easy uh crack cap let's see we talking about this cap here cracked i don't think so it's just no i'm pretty sure the fault that resistor you know be reading 200 odd ohms it's well and truly out of spec considering it's either supposed to be two or zero so i'm just trying to find a 2936 board i've got so many 3115s it's funny you go through transitions with your boards where you have like too much of one board and you're missing another tough board so you stock up and then before you know it you're completely out of that board that you had too much of before and it's swings all around the place i for goodness sake come on i know but yay i knew i had a 29 36 is there some way you can find a full resistance without pan tell us how do you mean exactly i mean that's why we generally have donor boards because the donor board will just you don't even have to know what's going on just swap it out but don't without a schematic and board view it is pretty hard to work on these things unless there's a clearly obvious visual fault essentially these boards feel like they've actually got leaded solder on i doubt they do but it feels like it maybe apple was just using something nice like sac 305 or something for this sort of oh there's an assault no you can't do a voltage injections you can find shorted parts but again you've got to pretty much know where you're heading with that and then you really got to know what your limits are ah like make sure you put the exhaust filter on now we get pedantic and we're going to ruin something right so now if we measure that resistance it should be something closer to two or three probably four there we go 4.6 that's much better than 200 it's a the back in frame you get covered by your head next to the plus sign crack uh i think that's a scratch they're just scratches well not even scratches they're printing things i cannot see any cracked anything there really based on the behavior of this machine then to me that resistor there was the smoking gun fault there was a hundred times more resistance than it should be and it matches the behavior that we were seeing where it tries to start up and then shuts it down tries to start up shuts it down because it's thinking that it's got too much current being drawn hey really necco which is why i'm not really looking anywhere else for faults because as far as i'm concerned that is definitely a fault it matches what i was expecting well it might but first i want to check it anyway sort of bridge i don't like to just always swap things blindly okay we get an instant power up so that's a good start and it's not shutting down 640 so that's more like what it should be let's plug a battery in let's check our pv bus voltage and see if it's rising i'd say it is because we're already up to 700 milliamp on the charge current so it is increasing 12 56 so i'm not not disagreeing with you in the replacement i'm just saying i want to check things first before i add another variable to the mix that i might not be able to differentiate from later all right looks like we're charging there too the i think the battery went cactus come on at least put me up to eight nine nine five six come on would help if i knew if i had a good battery it could be just a case that the battery is but it's not even it shouldn't be doing 1256 or whatever ah come on paul where have you put all those batteries you got so many of these older machines around and you're out not room who is that one no you feel too big what the hell you're an expensive battery it's always a pain when you buy out batteries but there's definitely a lifespan on how long you can hold them for you know wait too long and the batteries just sitting around will internally deteriorate it's kind of like trying to keep control of nuclear weapons i suppose oh yeah tartar storage would be good okay we shut down that's interesting i wonder if it shut down because it hasn't got a boot or anything like that with there's another issue there i don't know what the behavior pattern should be for that try that yeah it could be sweet yeah uh tony i have got my pc bites i just haven't had a chance to use them and funnily enough i decided the other day i really should have also bought the multimeter ones because i was doing something and it was i was trying to track a voltage and at that point i realized it was the multimeter that i needed but anyway i'll make another order and get them to i didn't think i was going to be needing them but i all right did see how this one goes i've put a boot disk in here just to see how it runs i haven't had an m1 yet no i imagine the first m1 i get is probably going to be my own yeah i don't think this is quite up to its task at the moment to be fair all of these batteries will be flat eight nine two hey here we go we've got the charge current picking up then uh must have been just the os booting something all right fine change the iso yeah the battery's got no power in it i was really wanting to just 100 verify before i went ahead with this but at least it's fairly constrained and it's what we're changing there definitely wasn't charge in the battery then because the batteries are too low so they've fallen below their safety threshold level and what typically will happen is instead of say charging at whatever their capacity current is say if they're a say they're a 2200 milliamp pack and then you can safely typically charge them at 2.2 amp at the peak rate anyway but once they fall below that threshold you drop to about one tenth of that so that would only be 220 million which makes it a little bit trickier to spot on the power supply then once it gets over the threshold voltage which is usually well depends on the depends on the chip design but usually they say about 2.7 volts on the cell some prefer to wait till about 2.85 2.9 and that's when you can jump back up into sort of a full 1c charge rate which will be whatever the capacity of the pack is like so if it's 200 sorry 2200 milliamp that you can safely charge them typically at 2.2 amp then you do get type cells which you can charge it like a 2c rate or a higher rate but for longevity you usually don't want to go above 1c too many times and half c definitely improves the life of a bit c just means capacity yep let's solder it on let's ship it like that no one's gonna notice it's not gonna go pop splattering i will be rotating this back around a little bit it is a little too skew but we just wanted to get rid of the bulk of the excess solder that was coming out there [Music] yeah riston i'm not the greatest for worrying about ocd but that was pushing it like this still has a bit of a smidge just over here i can see it's pulled down just a fraction but i'm going to be pushing my life too much by start stuffing around that okay so this battery is effectively flat but so we're gonna have to give it some time to do its do its juice making job it may not come back at all but we'll give it a shot okay a mistake but depends on the problem i didn't get to see tim's video but yeah it depends on the problem and also there's still going to be a good number of the circuits in or on that board that are similar to the intel board all right we're doing better on the current already unless this is going to drop off 9.66 it's yeah see that's creeping up now so we actually should see that reflected on the pv bus voltage there you can see people glasses creeping up now two nine two four six that's what you want to see that's how you know you're charging now riston good luck with trying to deal with that some people seem to have a knack of knowing exactly when to let go you know to make sure that it floats back to the proper position but yeah for me it's a bit like with you you just like gotta twitch you know twitch twitch twitch and hope you get lucky all right let's see if this one goes any better okay this is definitely a cactus battery the battery may have been shot through by something i don't know what but the fact that it immediately goes to 12 volts not a good sign because what it means there is that the smc is not detecting that that battery is even present and so it doesn't even try to charge it just the pv bus voltage is coming from the dc in connection and then boosted up by the iso there so nine and a half volts that this battery here is working it's one of my own but this one something's happened to it or it could have even been the fault maker we don't know it seems unlikely it'll be the fault maker but it's definitely no good let's see regarding tim's m1 thing his problem is the power station usb port probably the hub going around fired both the 17's in two more components okay well you see yeah they're we're used to dealing with the 3217s so that block of circuitry uh probably is a copy from something like a 1958 or something like that so is battery good for fireworks don't know i haven't actually tried ever doing that already had enough fun with that back in the early 2000s with the model aircraft batteries and you fly your electric plane and if you crash it the first thing you're wondering is you know is this thing going to catch on fire before i can get to it and take the battery out of it there are i'm happy with that i'm just gonna let's see i don't know if it's gonna hold much charge so when i pull the battery up pull the mag safe off where it'll just immediately ditch well i guess we'll see the immediately ditched there wasn't enough charge in that it wasn't even probably over one percent let's put it all back together and see how it goes with our boot system that isl solder job was clean enough that i don't think i'm not going to need to ultrasonic this board i don't have a problem with ultrasonic but i do like to avoid it where i can now if the rest of the board seems clean and there's no real apparent corrosion and if i can keep the flux dispersion under control then i prefer not to i prefer not to dunk the whole ball and put it through the process of an ultrasonic oh restaurant it stinks so bad doesn't it yeah the stench of a lithium-packed burning is just nasty still at least a bit safer than the nickel cadmium ones steve it was that clean that i really didn't feel the need to especially considering most the time when you put the alcohol on all that happens it just makes everything flood everywhere or at least at this point it's a very contained amount of flux i really did not see any need to do much with it and it's not a high activity flux it is a no clean at least i'm pretty damn sure it's a no clean i hope it is so technically you don't have to we just more do it because it's nice not to have to handle icky boards come on there we go every single time always drop that trackpad one i can't say i've ever really tried smelling burning pvc electrical tape and since you've described it then that's one less thing i have to do in life oops phillips phillips t6 let's see optimize logic query is there a big difference between 35 45 damps microsoft uh well that's really a barlow thing if you're three if you're maxing out of 35 which is actually probably 32 and a half you'll have a 0.7 barlow if you're 45 then you've got no barlow you'll just have the 0.7 to 4.5 primary objectives and they will be 10 by multiplied by the 20 by i sorry 10 by pieces so the eye pieces actually do a great majority of any magnification what did you just pick up then pull that's not right hey eddie no studio 54 so almost all the microscope heads that you see they're all 0.7 to 4.5 magnification internally and then it's just what you attach to the eyepieces and attach to the underside which is the barlow that will adjust your magnifications and your trade-off of course is your well your optical clarity and your working distance james ewing so i use a 0.7 on mine let's uh get that little bit of extra working distance and not too bad on the loss of magnification if you're working mostly on iphones then you pretty much wouldn't really need a barlow you just stay with your straight through which will give you the 45 magnification which is perfectly good for doing long screw damage on things like iphone 6s and stuff and if you are buying a microscope and you see things like where they say something like i'm trying to think now what it was but they'll advertise that as if it's got this massive zoom range it's not it's a case of what they're doing is you still got the same 0.7 to 4.5 head and they're just sort of not telling you that that zoom range is the collective array of ranges depending on what barlow you put on so they'll give you a point uh 0.5 down to a two by barlow whatever and they'll claim it's this continuous range but not unless you want to be switching out those barlows super fast so yeah don't get caught by that okay this is my battery greg i'm happy to say with my career issues here even the um person i'm dealing with is now actually going what is going on they're actually confounded by the fact that the tickets are not coming through to the right uh pickups so finally i managed to snare another person into my nest news account yes um they give you multiple i don't even know why i bothered that it looks like it's about 10 years out of date oops brightness is going up a little high that's my own fault oh wow dual boot windows on it only 169 watching yeah it's kind of i took a month off because of you know things that were happening before that happened i was picking up probably 400 500 maybe viewers a night and now i'm down to 169 so clearly i've upset the youtube gods they've decided to put me in the sin bin for a while optimize yes i use a 0.3 or 0.35 on my camera adapter that is because the sensor in the camera is a about a one-third of an inch sensor so you have to match that uh adapter magnification with your sensor size so if you have a half-inch sensor you'll want a 0.5 reducer for the tube for the adapter and that way they're matched up so that you get the maximum box letterbox cut out for the circular view if you mismatch them then you're going to either get rounded corners or you're going to get a very tiny slice of what you can actually see or what i can see when i'm working on the board viewers think it might go the same path as lewis yeah not likely for a few years yet with the youtube adsense tax thing the w8 bin i've already done that many years ago with other things so it was no drama at all but because i used to well still do published books through amazon i had to go through that about 10 12 years ago now so yeah that's that's all um that's all done and dusted there's no drama at all okay we're charging at quite a good rate here we're doing three amps so hopefully we'll see some pickup optimize which one do you have do you have the round corners or do you have just a teeny tiny portion of what you think you should see okay that's good okay microphone works didn't completely butcher it keyboard's all good yeah you guys can't really see that bit hard to get the tilt yeah keyboard test has passed you have the aimscape hd 200v is that the camera or is let's say it doesn't sound like one of their microscopes i am glad that i invested the money into getting a give the proper camera the big sony one along with the 0.3 adapter because that eliminates such a huge number of issues 0.45 yeah okay so you actually you'll be wanting a 0.3 yummy steak you know i saw something about pizza just flashing past in the chat just then and i thought i bet betcha that's yummy steak and i was right oh and hello to grease by the way i just saw that there okay so we're at 7 eight frames per second which is about right for 29.36 it is a bit of a chugger i mean it's an old machine i mean be fair but this is illustrating also the problem i've got on that other machine i worked on last night is that i'll get around about the same frames per second but i should get more because it's a newer board better chip but also it would not bring up the temperatures like here we're sitting at you know 199 you have fairly high temperatures while we're running uh the valley test which is what you'd expect but the other one won't do it it just sits at about 40 50 degrees which is more the idle temperature so i have a feeling i may have an smc issue on that one so we'll have to replace that but it's getting a bit late i'm going to do it tonight hey vladimir ah joseph king's here too i also don't get to see half of the people chatting in here at times yeah okay now the only issue we've got this point is we've been charging like we're sitting at three amps but the battery is still actually only showing zero percent so this battery could be trying to charge but it's just doing a bad job and it's yeah it's definitely thinking it's got zero charge in it oh arnold yeah i did actually see that script a while ago unfortunately things sort of went up all over the place before was in python though i mean i don't know python i felt i felt compelled to rewrite it in c which makes it not very portable so what we're waiting on here is to see if this battery will charge and it's still not but i have a feeling it's more hey warren stamps you're just coming into the end of everything i'm sorry to say yeah this power's going to be going somewhere and we were seeing the battery voltage come up either it was extremely low see if it's charging at three let's call it two amps at this point two and a half amps if it's charging at that rate then it thinks that it's okay to do so so we'd expect to see a few percent of the battery i don't know i think i'll have to scrounge around tomorrow and find another pack oh i know i've got the perfect macbook that i had the other week that macbook that came in and it was just dead set immaculate that one uh which funnily enough i'm selling i can't i have no compelling reason to keep it i sold a macbook air tonight and i've already sold a second one that i don't yet have because the person really liked the first one and it's kind of sad to sell off the machines but i've got to be realistic you know i've got so many carcasses here i've got a but they're all old carcasses you know they're all um 12 78 12 86's 13 69 yeah all the older stuff and i really need to thin that out now yeah but this battery is not going anywhere i'm just kind of curious where that power is going though yeah 60 odd watts that's a lot of power steve cabin see if that works given the fairly constricted um size optical size of the heads on these microscopes i think you probably get to about two 3k pixels on the video as in as opposed to 1k 4k before you really oh we just got one percent on the battery now care to show your selling price share your selling prices uh usually about 450 to 550 for them australian dollars enjoy the bro jct have some uh buddha and uh well stuff yourself with some biltong for me and then go crazy and stuff yourself with pop and sauce i do miss pop and sauce i've tried making it here myself but i suck at it the pump i can make sort of but the sauce no good oh and drink plenty of um plenty of hunters that was my main guilty pleasure in south africa drinking lots of hunters yeah barry that's true yeah i said to the person you know if anything goes wrong i can always repair them they said yeah that's why they're buying it from me like i said we have got one percent up so it really must just be right down at the very bottom get a leader to make it not sure she would care to make that but yeah i've never had really much luck making selfs of any kind yeah we're up to two percent now so it is picking up it was just a very very depleted battery stuart means is yeah that's true though they're not cheap and this one in particular it's a top of the line it's like what was it it was a 2.5 gigahertz i7 8 gigs ram eight two zero three one one five and yeah i mean it was just it's an immaculate machine like i said it kills me to be selling it but i have to be realistic and it's like what am i going to do with it i don't do anything with it i've got my 1502 and i've got my 1466 and that's really all the machine i've got a 1398 that is just rotting in a box here and it has a absolutely mint perfect screen on it it feels like a shame to actually just keep that in a box but i'm waiting for the day where someone needs or one of my customers needs an a1398 screen and i can bring it out because those things still cost you a thousand bucks and i can bring it out and finally make my margin on it steve um yeah love is one thing but you also sometimes there's some types of cooking that you just can't seem to get the feel for she does excellent food in the various areas that she does but i don't think south african food is really going to be her thing these might be but i have a very strong feeling that they're all out of date by the looks of it joseph king that's a terrible joke uh i don't know if this is going to crash now but um mikey dude you're welcome thank you okay so yeah low power that's right so it does sustain itself now so we definitely gotta win here i'll just tell the customer they need new battery um i could ship them this one and see how they go with it yeah we have 2016 non-touch bar for 200 well that's nice the claim didn't work main boards fine turns out the screen was cracked yeah were you able to get that screen replaced spices mill spices do make things better this battery must be very weak because just in that five seconds i took it off it lost two percent need to order more fruitcakes uh she's probably going to say that i am the fruitcake in this family this charging adapter is it's in my tools page you can get them online otherwise what we normally do is we just take existing broken mag safe bricks cut the cables and just power it directly that way you lost your job i'm sorry to hear that what were you uh the company closed down or something or just the market change i mean covert wrecked it for most people all right okay i'm gonna go thank you very much for watching and uh yeah it's pretty late uh let's see how past twelve time for me to go and kick back and enjoy life for a little bit appreciate it and i'll see you all next time don't know when there'll be it is the weekend coming up i may have 20 machines here that need fixing but they're the sort of machines that i've really got to shut out everything and focus on what i'm trying to do and unfortunately i hate to say it having a youtube live audience kind of kills that sort of mind state so sorry about that but as soon as i came back i'll catch up with you then until then you'll take care i'll see you later

Channel: Paul Daniels

Views: 13,310

Keywords:

Id: 2VikUPnNu_U

Length: 79min 33sec (4773 seconds)

Published: Fri Mar 12 2021