[3d pen] 3D펜으로 플라잉더치맨 만들기 : Making Flying Dutchman in Pirates of the Caribbean

HI I don't usually use drawings. But I'm going to use a drawing for this work. As you can see from the preview, This work is called Flying Dutchman. I saw Flying Dutchman for the first time in the movie Pirates of the Caribbean. It is a cursed ship that cannot be anchored in the harbor and must sail forever. And most of all, it was the coolest ship in the movie. Anyway, I wanted to buy a model of this ship because it was so nice. They weren't sold on the market, so I decided to make them myself. Make a frame using the pre-drawn drawings. In the end, I'll just make it as I feel. I should have made it a little smaller...... Add details of deck. Flying Dutchman can sail in any weather condition. The speed of a headwind is faster than that of a black pearl. and It's a ship that can even dive. The crew is all undead anyway, so we can dive in. Keep adding details. This ship has a total of 40 gunports on both sides. There are two cannons at the front. To put it simply I have to drill a total of 42 holes. This is how the texture of the pear is expressed. f you express the texture like this, It's convenient because you don't have to trim the surface neatly. I thought my wrist was going to break. Next, make a Helm. For your information, Helm adjusts the ship's direction. I'll try to make it move. I'll use the clip to finish the work. have a screaming face To put it simply I have to make a total of 22 screaming faces. I can't make it twice. Now make the front The front of the Flying Dutchman reminds me of the teeth of an animal. The quality of the front determines whether it's a nice tooth ornament or just a broken ship. I think the point of Flying Dutchman is right up front. What's this for? Detail If you look at the front of the Dutchman, you can see why it's called the fear of the sea. Add Details of Deck wow I can't do it twice. For your information, this is a screen sticker. Flying Dutchman gives off a spooky glow. So I prepared an LED. The light is soft. I'll make you some back details. I made a window. Light is visible from inside the cabin. Continue adding details What's this for? I've been building things for half a day that I don't even know what they're for. fish face shape When do we finish this? I finally completed it. Keep making the back decorations. Secure the switch to the top. I'm gonna make it open and close. made it so I could change the batteries later. There's a very strange decoration. It's like a mixture of seafood and sea monsters. Let's add a few octopuses. That sounds pretty good. I'm gonna stick it on the switch. Gluggun makes it very convenient for you. It presses very well. I can change the batteries very comfortably. Continue to decorate. It's easy Next, make a railing. It's a ghost ship, so you don't have to clean it up. Detail Detail 2 The stairs were made by cutting wooden chopsticks. There was a skull ornament in the front. Make a mast using a wooden stick. I'll put an observatory on it. cannon pedestal Connect the rope. This was hard to make. I'll spray the surfacers first before I add the rope. I don't think we need to color it. I'm gonna use a well-dried wet tissue to make a sail. Cut it with a knife and scratch it. Finally, make a cannon using ballpoint pen shims. Flying Dutchman is complete. I've tried to make it as spooky as possible. Thank you for watching the video. I hope you always take good care of your health. I'll see you in the next piece.

Channel: 3Dpen_리주네 LIJUNE

Views: 2,310,596

Rating: 4.90272 out of 5

Keywords: 3D펜, 3dpen, 3d pen, 사나고, making, 3d펜초보, Flying Dutchman, 플라잉더치맨, 캐리비안의해적, pirates of the Caribbean, 3d, 리주네, lijune, 3d pen art, 만들기, sanago

Id: inloe3mYAOs

Length: 13min 51sec (831 seconds)

Published: Tue Aug 25 2020