It's a Canon G2900 multifunction machine. In this state Let's check the nozzle. Oh? But there are 5200 errors here.
55200 Error - Error caused by poor ink supply So I asked them to turn it off and on again, but if I can't turn it off and on again, When you go to the device, the lights come up alternately. Then, I will press the stop button for 5 seconds It still blinks when I press it
I'll look for another way. You can't press the stop button We can't do it when it's blinking, so we'll turn it off to stop it. I'll turn it on again. Now, I'll press the stop button
(Press until the orange light flashes 5 times.) Three, four, five times I'll take my hands off Let me print it out again. I came back to the computer Let's check the nozzle The sound of the ink supply... The error is coming up again 5200 error is coming up again What should I do with this? So let's try another way.
Let's turn off the power first It's because the ink isn't supplied when it's ready, so I'll clean the head I'll come to the computer and press clean
All Colors The error comes up again even though I clean up Cancel it Turn it off again I'll turn it on again With the power on, I'll clean it up thoroughly Even if I clean thoroughly, the error pops up again I canceled it and turned it off again I'll turn it on again When you're ready,
Let's clean the system this time. It's working with a rattling sound. When the system is cleaned, the flashing green light stops. Yes, I think I'm ready after cleaning the system I'll press the inspection pattern print. When I pressed it, it was like this It works well. So the output came out clean.
