Today we are replacing the chip on the laser printer. Today we are replacing the chip on the laser printer. It is an infinite chip that increases the output frequency. I have replaced black infinite chips. Today we're going to replace a different color chip, and we're going to tell you why and how to change it. Today we're going to replace a different color chip, and we're going to tell you why and how to change it. (Output) I'll do the test first. I'm getting a message that the printer is almost completely out of yellow. I'm getting a message that the printer is almost completely out of yellow. Let's put it in yellow Press the print button, and I'll show you how it works. When you press the output, the message is low in ink (2% remaining). All It's coming out, and it's actually yellow. It's coming out, and it's actually yellow. Actually, when I printed yellow, I got a message saying that I had one percent left, and this is actually a problem. Actually, when I printed yellow, I got a message saying that I had one percent left, and this is actually a problem. It's actually got toner in it. But the message says that there are 2% left. I heard it from the seller. I heard it from the seller. In fact, the number of use of the laser printer is set in Samsung printer chip, not 2 percent of the toner left. In fact, the number of use of the laser printer is set in Samsung printer chip, not 2 percent of the toner left. So, if you turn this chip into an infinite chip, it's going to increase the number of uses. So, if you turn this chip into an infinite chip, it's going to increase the number of uses. So, if you turn this chip into an infinite chip, it's going to increase the number of uses. If you're using unlimited chips, and you run out of toner, you can charge the toner. If you're using unlimited chips, and you run out of toner, you can charge the toner. If you're using unlimited chips, and you run out of toner, you can charge the toner. So, let me show you how to turn the original chip into an infinite chip. I've got a gas philtrum. I'll change the pharynx tip to cut the plastic. Remove the yellow printer toner to be replaced. (Visual genuine chips) I'll take this chip out and show you how to replace it. (I'll heat the beans in advance) I took out the toner. You have to cut it well. I think we need to finish with a knife. Haha It's not this difficult to separate. I just took out a genuine chip. If you change the original chip with a very short number of times, you can use it for much longer. If you want to change Infinite Chip, you can put the original chip in the direction you took out. I'll put it back in the direction I took off the original chip. I'll put it back in the direction I took off the original chip. The cut part, you can put it on tape or something. Simply attach it. I'd like to be more neat, so I can glue it. But the glue could flow and reach the chip. I'll just tape it up. I'll put the toner back in its original position. I used black very often, so I replaced it with an infinite chip. I used black very often, so I replaced it with an infinite chip. I used black very often, so I replaced it with an infinite chip. For the rest of the color, this is the first time I've changed the yellow color. For the rest of the color, this is the first time I've changed the yellow color. For the rest of the color, this is the first time I've changed the yellow color. I'll see what happens if you print it out while you change it. We had 2% left, and then when we tested it, we got 1% left. We had 2% left, and then when we tested it, we got 1% left. It's still pre-output. They're changing the chip, so the printer must recognize it. (A minute or so) You I think it's stopped, so I'll print it out. Print-button click: low toner message missing Print-button click: low toner message missing Start output immediately without a low message The reason why I use laser printer is because it is fast and especially when I send delivery service, the letters do not spread even if the paper gets caught in the rain. The reason why I use laser printer is because it is fast and especially when I send delivery service, the letters do not spread even if the paper gets caught in the rain. The reason why I use laser printer is because it is fast and especially when I send delivery service, the letters do not spread even if the paper gets caught in the rain. The new output is very neat, right? (as if it were much cleaner) Where's the one I picked? The printing results of the chip change later are cleaner than the first one. Due to the limited number of outputs in the original chip, I think we used less toner. Due to the limited number of outputs in the original chip, I think we used less toner. Due to the limited number of outputs in the original chip, I think we used less toner. Due to the limited number of outputs in the original chip, I think we used less toner. After replacing the infinite chips, the colors are very dark. After replacing the infinite chips, the colors are very dark. I mean, it wasn't really the lack of toner!! For those of you who didn't know that, I'm afraid you'll get a lot of new toner for a very high price and buy it again. For those of you who didn't know that, I'm afraid you'll get a lot of new toner for a very high price and buy it again. So, today, I showed you how to replace the original chip with an infinite chip. Was there anything special? Haha So, today, I showed you how to replace the original chip with an infinite chip. Was there anything special? Haha If you don't have a pharynx like me, it will come apart if you gently scratch the same part with a knife. (Plastic parts aren't too thick.) If you don't have a pharynx like me, it will come apart if you gently scratch the same part with a knife. (Plastic parts aren't too thick.) Be very careful with the knife. Be careful with your hands. Be very careful with the knife. Be careful with your hands. We don't need this genuine chip, which is limited to the number of times. Infinite and genuine chips have different PCB substrates. (The original chip is blue, and the infinite chip is green.) Infinite and genuine chips have different PCB substrates. (The original chip is blue, and the infinite chip is green.) Infinite and genuine chips have different PCB substrates. (The original chip is blue, and the infinite chip is green.) Infinite and genuine chips have different PCB substrates. (The original chip is blue, and the infinite chip is green.) I'm done. I'm done.
