방에 정글 팔루다리움 만들기 | Homemade jungle Paludarium🏡

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hello. This is GuGarden :) Today we will make a jungle concept paludarium. First, I will make a filtration box using Foamex. Be careful not to hurt your hands.. Make a hole for the water to flow in. I will hold the Foamex box in place. will use silicone to secure it. It is okay not to silicone it too neatly since it is a part that will be covered anyway. But I will do it neatly..^^ It is a Polynagel sponge. It prevents foreign substances from entering the area where water enters. It is also light in weight, so it is suitable for use as a bottom flooring material It is a non-woven fabric for gardening. It prevents foreign substances from entering the sponge. I will use a stone to cover the cross section of the sponge. Sprinkle dried peat moss to cover the silicone. I found pretty driftwood with a hole. . I will drill a hole to remove the rubber hose. Insert the submersible pump. Pull it out smoothly. Lay it out with a cork tube. Fix it first with a glue gun. Think of it as fixing all the materials. Temporarily fix it with a glue gun, then completely fix it with silicone. It fills the space naturally. I don't use urethane foam. The layout is done using only driftwood and cork tubes. Of course, it costs a lot, but urethane foam inevitably has an unnatural feel. There is no right answer to the layout. What is pretty in your own opinion is the right answer. We'll make a stone bridge using yellow stone. We'll cut a rubber hose to make a waterway. We'll use leftover wood pieces to cover the hose. It's a Terra Board. Let's fill the wall with this. It is a material called Terracloth. It feels like tightly packed dirt. Terracloth is also a suitable material for wall layout. I'll clean it up lightly. I'll test it by pouring water. It comes out fine, but the water pressure is too strong and the sound is loud. If you cut the sponge and close the gap, a calm water path is created and it becomes quiet, right? Drain the water. Please remove any foreign substances in the water as well. I will fill in the empty space on the floor with volcanic stone granules. Since I will be raising fish in this paludarium, I will safely seal the inside of the cork tube. After drying for more than 24 hours, I will fill in any missing parts. When I make a large-scale work like this, I keep getting greedy and making changes. When gluing driftwood or stones, you can put tissue paper in the cracks and use strong adhesive to adhere quickly. After drying for another 24 hours, I filled in the parts that I felt were lacking. Now I'm liking it :) The soil I use is peat moss. It is used by mixing water with soil. Fill the bottom with soil. It is an underwater heater that maintains the water temperature at 25 degrees. Pour and drain water several times to remove fallen dirt or foreign substances. is a filter material that purifies water. I'll put it in the Formax filtration box. Pour sand for the fish tank. Make it into the shape you like. Moss needs to adhere closely to grow well. I mainly used feather moss and wool moss. Secure it with wire. The fish are half-big delmogenei and cherry barb. Half-big delmogeni looks like a silver cutlassfish. It's unique and cute. If you found the video interesting and helpful, please like and subscribe :) Thank you
Info
Channel: 구의정원 GUGARDEN
Views: 41,528
Rating: undefined out of 5
Keywords: 팔루다리움, paludarium, aquascape, 비바리움, 팔루다리움 만들기, 비바리움 만들기, 만들기, 팔루다리움 만드는 방법, 팔루다리움 제작, 팔루다리움 재료, 테라리움, 테라리움 만들기, 팔루다리움 관리, 이끼, 팔루다리움 이끼, 팔루다리움 식물, 팔루다리움 어항, 엑소테라, EXOTERRA, 팔루다리움 제작과정, 어항만들기, 어항, 테라리움 만드는 법, 비바리움 만드는 법, 팔루, 팔루다, 이끼테라리움, 물생활, 풀멍, 물멍, 실내정글, 정글식물, 식물, 식집사, 식물집사, 물고기, 열대어, 체리바브, 재료
Id: zaa4YjjdtDo
Channel Id: undefined
Length: 17min 0sec (1020 seconds)
Published: Fri Dec 29 2023
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.