Hello friends, today I am going to introduce to you nail guns, nails, and the uses of their various nails. The information card in the upper right corner of the screen, the playlist on the homepage , and the end of the screen will have related and recommended videos. Don’t forget to send them to me. Like and share my video. Hello friends , here I have some nail guns. There are 1234 in total. 4 nail guns, blue, red, green , and this one is also green . And here in front, I have 1 type and 2. There are 3 types, 4 types and 4 types of nails.
These are basically some of the more common nails and nail guns that we commonly use. Because the nails are different, they must be matched with different nail guns. There is no way to mix them. There is no way to choose one. Nail guns can use all styles of nails. After I introduce it to you later, everyone will know better. Because the length of nails and their specifications and shapes are different, there is no way for one nail gun to use all nails . Because of the magazine? It is designed for a specific style of nails , so it cannot be mixed. So why do you need to prepare so many nail guns ? Finally, I will talk to you later about what kind of situations these nails are used for . First of all, we Starting from the left side, look at this type. Generally we call it stainless steel nails. Stainless steel nails are the thickest and largest. Then there are several boxes here. They are different in length. You can take a look at this number . Viewed from this side, the head of the nail looks like this. It is T-shaped. Some people may call it a T-nail. It is T-shaped . Generally, we call it this. fF Nail Oh, we call this a steel nail. That nail gun is called a big steel tooth. It can support up to the longest nail. The length of this nail is up to 6.4 centimeters. There seems to be another one called the big steel tooth. The small steel cannon. The small steel cannon supports up to 5 centimeters. This one is called F Ding. F nail. You can take a look at his head. Compared with this one, let’s make a comparison. Is it better ? It's much smaller , and the nail itself is also relatively thin. Is it clearer? You can compare it a little bit. This kind of F nail also has different lengths. We call it F nail. That nail gun is green. The nail gun at the back is called an F nail gun. There are nails of different lengths here, generally ranging from 15 to 50. The more commonly used ones are 15, 20,
20, which is 2 centimeters, 20mm , and 25, 30, 35, 40, 45, 50, so this kind of It's the thickest one, and the second thickest one. And here's the red one . It's specially used for this kind of nails. In Taiwan, these nails are called "ㄇ" nails, just like the "ㄇ" character in our phonetic symbols. There seems to be some places in Hong Kong. What is called a horse nail? Then it can also be called a J nail. Why is it called a J nail? Because where the nail is on the box, it will say J. For example, J13 , the length of this one is 13mm. Some people will call it J nail or J nail. Horse nails are also called ㄇ nails. We call them ㄇ nails in Taiwan. They are like this. A ㄇ-shaped one. It has width specifications and length specifications. Like mine, the width used by the red nail gun is about 5mm . There are different lengths, like I have, I have 8mm length, then 13mm, and 19mm. It looks like this. It looks like an arch,
which is a bit like the staples we use. The last one is the last one. The blue one on the far right is what we commonly call the mosquito nail gun. Let’s take a look at the mosquito nails. They look like this . Mosquito nails are divided into headless and headless ones, like this on my hand. This one has a head. If it has a head, it is needle-shaped on one side and the head protrudes a little on the other side. Why is it called a mosquito nail? It is a very thin nail. When you nail it on, there are only a few small holes, which makes it less obvious to others . As for the Mosquito Nail, he has a head or a headless one. Maybe it’s not obvious in the picture taken here because he is already very small. It ’s hard to tell. The one on the left is with a head and the one on the right is without one. If the head is headless , it will feel like a needle. The front is also round and the back is also round. It means there is no head. Then we can compare it. Like this one, it is a mosquito nail , right? This one is easy to punch out one by one. Just one by one, this is the F nail. Look at the thickness. Let's compare the thickness. Okay, so everyone can compare. You see, this is the mosquito nail. Put it like this. This is the mosquito nail on the right side. This mosquito nail is the F nail. Then This is a stainless steel nail from ST. It should be obvious if you see whether it is thick or thin . Of course, each type has a different length. Mosquito nails, if I am prepared, they are probably up to 30. It seems that the longest one is up to 35. 35 is 3.5 centimeters, so let’s talk about its use now. We used this initial basic steel nail to nail wooden boards or angle wood, basically angle wood, to cement walls . So where is his gun? It also needs a special large arm. The air chamber is the place where the air is stored. It also needs to be particularly large so that it is strong enough. The main purpose is to nail the corner timbers and wooden boards to the wall. What about these F nails? What is our main use of F nails ? For example , it is used for pegs or wooden boards. In short, it is used for wooden pegs. If you want to nail the wall, you must use this type of steel nail or wooden dice. For wood, we will use F nails, and then for wood nails, we will also use this kind of U-shaped nails. For wood, like these two, is there a difference in length? The width is the same. Please pay attention when buying this. There may be several widths , and it depends on what width your gun is using. If the width you buy is wrong, it cannot be used . The width must be fixed, and the length can be selected . Generally, we are looking at some thin boards like thin boards. Thin boards are nailed to the angle wood. Why are some thin boards nailed? Because generally when we use this kind of F nails, if the board is too thin, it will not be able to grab the board. So why is it necessary like this? Only the O-shaped staples can grasp wooden boards or partition boards like those we are looking at. They all use this type of calcium silicate board because the fine calcium silicate board is more brittle. If you use When this kind of nail is nailed on, the head is not big enough and the strength is not strong enough to grab the board. Well, we will use this kind of frame and nail it. When it is nailed, it can grab the board. So in that case, we will use this U-shaped nail. Or we are nailing, for example, nailing the cloth on the wooden board, or nailing, uh, thin ones, um, moisture- proof and moisture-proof mats for partitions , etc. Is there sometimes a layer of moisture-proofing that is laid down first when making walls? The one that is good for waterproofing and moisture -proof is usually used when it comes to moisture-proof and moisture -proof pads . The last one is this kind of mosquito nail gun. What do you do when it is so thin ? It is usually used on solid wood nails. This is used. On the solid wood, because the structure of solid wood is relatively solid, it is not as solid as some composite boards and the like. Solid wood is relatively solid . It does not need a big head to grab the wood , and it may have a small head. He can just grasp it a little bit . Sometimes people use it to make fixings. For example, if you have just applied glue and want to fix it first , but don't want to nail it, there will be a big hole there. He can use this kind of nail gun, similar to this kind of nail , or when people use it to make solid wood , uh, the holes are small, um, it is more beautiful, so I basically use these 4 types of nails . I just mentioned that uh, there is no way to try out every type of nail with a nail gun. Then let's take a look at its design . It will be obvious if you look at these two . So this is a nail gun for F nails. Then it has bullets. The design of the clamping place is like this .
Is there a groove, a groove, and a groove ? Then you just put the head on top , and then put the pointed one below . Is it this length? This is 50's 5 centimeters , so it just fits right up there. This groove is one every five centimeters, so you can put 50's, 45's, 40's, 30's like this. At the bottom, it might be 15's like this. The design is like this , so the design of the magazine is different for each type of nail gun . So for example, if you want to put this, you want to put this , Martin, he As long as he is not suitable, not suitable, it means that his magazine cannot hold this. You see, his Martin can't get in at all. If he can't get in, there is no way to shoot out. So let's take a look at his red one. The design of this red magazine is like this. It is different from the one just now. The design is like this. There is a hook groove on this side. If there is a hook groove, we will use this and this nail to connect this side. It's on the top and this is on the inside. Then put it in like this and push it forward to the end. Then the lid is closed like this. So the designs of the magazines are different . So the nails can't be mixed. There's no way to tell me what I want. If you want to install f-nails and f-nails in this, Martin's nail gun cannot install them well. For example, if you want to install these f-nails in this, it cannot be installed. Therefore, this nail gun and nails cannot be mixed . So what kind of glue gun does this go with what kind of nails? And what I put at the back? These are all pneumatic nail guns. Pneumatic nail guns . Recently, I have been looking at some electric butt guns, like the one I bought. Just ah, there was a video before that introduced Makita's dfn 350. Oh, this is the f-nail nail gun . The f-nail nail gun and its length resources are from 15 to 35. Well, what about the green one at the back? Its resource length is OK. to 50, so it can source longer nails , but this f N350 supports up to 35, so if the board is too thick, it may not be very suitable for this one , but generally speaking, it is OK, because our boards are generally 15mm to 18mm is considered very thick . Generally speaking, this one may still be used. There was a video before that talked about the dst 421. That one should be a Martin gun because it hasn’t appeared on the market yet, uh, not yet. They started selling nails like this, the U-shaped nail ST421. They probably used this kind of nails , and their width was said to be four meters, so I was thinking they should use the same specifications as this one , because they have another one. The specifications are dst. The one starting with 3 is about 12 meters wide, so I can’t use nails of this size for the one starting with 3. 421 I think it should be a nail of this size. I will have to confirm
it later. I still have to remind my friends that when using this kind of nail gun, protective measures must be taken. Like me, I have been nailed by the nails of this nail gun again . Like this Taiwanese nail gun, this kind of drive nail gun. Let me mention it again. There is no protection mechanism at all. Look like the trigger of this nail gun is very light. So that time I put the nail gun on the floor and when I was going to pick it up, I accidentally touched it with my hand . It came out, it has no protection mechanism, and there is no design on the front that says you have to press it on something to nail it, so as long as there are nails inside and the air duct is inserted, my hand accidentally touched this place when I was holding it. Ah, he shot out because he is very light. This electric nail gun like this Makita has a protective mechanism. The front of his head is a little elastic here. Is it elastic here ? So You have to press it down, press it on the object , and then you can pull the trigger and the machine will shoot out . If you accidentally touch it, you can't press it down. And the other thing is that there is a switch here. I just have to develop good habits. I have the habit of turning it off when I don't need to use it. If I want to use it, turn it on again. After turning it on, I have to press it on something to press the trigger. Then the trigger is not as gentle as the pneumatic one. It shoots out with just one touch. How about these ones? The 123 and these three are not designed for safety. Only this one has big steel teeth. Because the nails are really scary, they are too big. He has a design on the front. This is a safety device . The elasticity of his safety device is not very good. As for his safety device, you have to hold it against the east and west triggers. Press, then if you don't press the thing, the trigger will not buckle, but the elasticity is too loose. I feel like there is no spring installed. If you use a nail gun, it is best to wear protective equipment, goggles, etc. Oh, I still need to take it a little bit. It will be safer this way . If you don't understand anything or have any questions, you can leave a message below. If you like my video, remember to give me a like and then share my video. I went out and recently I am thinking of replacing these pneumatic ones with electric ones. The main ones are the two that are most commonly used by everyone. The red one and the green one are the f-ding wood and the wooden board . This U-shaped nail has the greatest chance of being used when nailing some thin boards . This time it is really only used when you are nailing wood strips to the wall. The boards need to be nailed to the wall . How many mosquito nails did I use? The probability is not too high. If I use mosquito nails, the probability is not too high. So I will share it with you here.